LAB SCALE

Lab Scale

Coin Cell Crimping

Overview

This device represent as assembling coin cell using individual part.
Assembly principle is loading each part, then apply enough load to assemble.
Electrolyte leaking is not be happen if assembly process well.
CR2032 coin cell type is mainly used.

Specification
Type Auto
Operational Time Approx. 25 seconds per operation
Crimping Holding Time Approx. 2 seconds
Control Button Type, Speed Controller Unit
Door Material Polycarbonate
Sensor Stroke Height Sensor (Up/Down)
Applicable Coin Cell CR2032
Power AC 220V, 60Hz, 300W
Dimension 260(W) x 220(D) x 390(H) mm